Click here

REAR NO. 2 SEAT INNER BELT ASSEMBLY INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY


    1. A015B7KE01

      Install the 2 belts.

      Note:

      • Make sure the claws are facing away from the seat.

      • Do not overlap the anchor part of the seat belt and protruding parts of the seat.

  2. Click here

    INSTALL REAR SEAT INNER BELT SUB-ASSEMBLY (for LH Side)


    1. Install the belt with the nut.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not overlap the anchor part of the seat belt and protruding parts of the seat.

      Tip:

      The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, connect it when installing the rear seat inner belt.

  3. Click here

    INSTALL REAR SEAT OUTER BELT SUB-ASSEMBLY (for RH Side)


    1. Install the belt with the nut.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not overlap the anchor part of the seat belt and protruding parts of the seat.

      Tip:

      The rear No. 2 seat inner belt is fixed with the same nut as the rear seat outer belt. Therefore, connect it when installing the rear seat outer belt.

  4. Click here

    INSTALL NO. 3 SEAT LEG COVER NO. 2


    1. Attach the 4 claws to install the cover.

    2. Install the 2 screws.

  5. Click here

    INSTALL NO. 3 SEAT FRONT BRACKET COVER LH


    1. Attach the 4 claws to install the cover.

  6. Click here

    INSTALL REAR SEAT CUSHION UNDER COVER LH


    1. A015DYS

      Install the cover with the 7 screws.

    2. A015835

      Attach the 16 claws.

  7. Click here

    INSTALL 3RD SEAT LINK SUB-ASSEMBLY LH


    1. Install the seat link with the bolt and nut.

      8.5 N*m 87 kgf*cm 75 in.*lbf
  8. Click here

    INSTALL NO. 2 SEAT LEG COVER NO. 2


    1. Install the seat leg cover with the screw.

  9. Click here

    INSTALL REAR NO. 3 SEAT LEG COVER LH


    1. A015BQP

      Install the seat leg cover with the 2 screws.

    2. A015CGW

      Install the spring of the seat stay ball-joint.

    3. Connect the seat stay to the seat frame.

  10. Click here

    INSTALL REAR SEAT REAR BRACKET COVER REAR


    1. Attach the 2 claws to install the cover.

  11. Click here

    INSTALL RECLINING ADJUSTER COVER RH


    1. Attach the 5 claws in the order shown in the illustration to install the cover.

    2. Install the screw.

  12. Click here

    INSTALL RECLINING ADJUSTER COVER LH


    1. Attach the 3 claws in the order shown in the illustration to install the cover.

    2. Install the screw.

  13. Click here

    INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH


    1. Install the release handle with the screw.

  14. Click here

    INSTALL SEAT ADJUSTER BOLT COVER


    1. Attach the 2 claws to install the cover.

  15. Click here

    INSTALL REAR NO. 2 SEAT ASSEMBLY (for LH Side)


    1. Install the rear No. 2 seat assembly (Click here).