Click here

REAR NO. 2 SEAT INNER BELT ASSEMBLY REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

Click here
  1. Click here

    REMOVE REAR NO. 2 SEAT ASSEMBLY LH


    1. Remove the rear No. 2 seat assembly LH (Click here).

  2. Click here

    REMOVE SEAT ADJUSTER BOLT COVER


    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 1. Text in Illustration
      *1 Protective Tape
  3. Click here

    REMOVE NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH


    1. Remove the screw and release handle.

  4. Click here

    REMOVE RECLINING ADJUSTER COVER LH


    1. Remove the screw.

    2. Detach the 3 claws in the order shown in the illustration, and then remove the cover.

  5. Click here

    REMOVE RECLINING ADJUSTER COVER RH


    1. Remove the screw.

    2. Detach the 5 claws in the order shown in the illustration, and then remove the cover.

  6. Click here

    REMOVE REAR SEAT REAR BRACKET COVER REAR


    1. Detach the 2 claws and cover.

  7. Click here

    REMOVE REAR NO. 3 SEAT LEG COVER LH


    1. A0158OY

      Using a screwdriver, remove the spring of the seat stay ball-joint.

    2. Disconnect the seat stay.

    3. A015BQP

      Remove the 2 screws and cover.

  8. Click here

    REMOVE NO. 2 SEAT LEG COVER NO. 2


    1. A015BA3

      Remove the screw and seat leg cover.

  9. Click here

    REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH


    1. Remove the bolt, nut and seat link.

  10. Click here

    REMOVE REAR SEAT CUSHION UNDER COVER LH


    1. A015835

      Detach the 16 claws.

    2. A015DYS

      Remove the 7 screws and cover.

  11. Click here

    REMOVE NO. 3 SEAT FRONT BRACKET COVER LH


    1. Detach the 4 claws and remove the cover.

  12. Click here

    REMOVE NO. 3 SEAT LEG COVER NO. 2


    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  13. Click here

    REMOVE REAR SEAT INNER BELT SUB-ASSEMBLY (for LH Side)


    1. Remove the nut and belt.

      Tip:

      The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, it becomes disconnected when the nut is removed.

  14. Click here

    REMOVE REAR SEAT OUTER BELT SUB-ASSEMBLY (for RH Side)


    1. Remove the nut and belt.

      Tip:

      The rear No. 2 seat inner belt is fixed with the same nut as the rear seat outer belt. Therefore, it becomes disconnected when the nut is removed.

  15. Click here

    REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY


    1. Remove the 2 belts.