Click here

AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) CHECK MODE PROCEDURE

Click here
Click here Click here
Click here
  1. A015E45E08

    LIST OF OPERATION METHODS

    By operating each of the air conditioning control switches as shown in the diagram below, it is possible to enter the diagnostic check mode.

    Tip:

    • Use the same procedures for the LHD vehicle and RHD vehicle.

    • The procedures listed below are for the LHD vehicle.

  2. A0155Q7E02

    INDICATOR CHECK


    1. Turn the engine switch off.

    2. Turn the engine switch on (ACC) and wait at least 5 seconds.

      Tip:

      Vehicle with Navigation System only.

    3. Turn the engine switch on (IG) while pressing the A/ C control panel "AUTO" switch and "Recirculation/ Fresh" switch simultaneously.

      Hold both switches until the indicator check screen appears.

      Table 1. Text in Illustration
      *A w/ Navigation System
      *B w/o Navigation System
    4. A0156ESE06

      Check that all indicators turn on and off 4 times in succession at 1 second intervals.

      Tip:

      • After the indicator check is completed, the system enters the DTC mode automatically.

      • Press the "Off" switch to cancel the indicator check.