FRONT SEAT OUTER BELT ASSEMBLY (for Bench Seat Type) REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  2. REMOVE FRONT DOOR SCUFF PLATE LH

    A0157IK

    1. Detach the 7 claws and 4 clips, and remove the scuff plate.

  3. REMOVE REAR STEP COVER

    A0159DZ

    Tech Tips

    Use the same procedure to remove the step cover on the other side.


    1. Detach the 2 claws and remove the step cover.

  4. REMOVE REAR DOOR SCUFF PLATE LH

    A015BJQ

    1. Remove the screw.

    2. Detach the 3 claws and 4 clips, and remove the scuff plate.

  5. REMOVE CENTER PILLAR GARNISH COVER LH

    Tech Tips


    • for Manual Seat:

      When removing the center pillar garnish cover, move the front seat and seatback to the foremost upright position.

    • for Power Seat:

      When removing the center pillar garnish cover, connect the cable to the negative (-) battery terminal and operate the power seat switch to move the front seat and seatback to the foremost upright position.

    • for Power Seat:

      After moving the front seat, disconnect the cable from the negative (-) battery terminal.


    1. A015AD3

      Detach the 2 clips and 2 guides, and remove the cover.

  6. REMOVE CENTER LOWER PILLAR GARNISH LH


    1. A0158WN

      Remove the bolt and seat belt anchor.

    2. A015C30

      Detach the 3 claws and 6 clips, and remove the center lower pillar garnish LH.

  7. REMOVE REAR ASSIST GRIP ASSEMBLY

    A0155B7

    Tech Tips

    Use the same procedure to remove the rear assist grip on the other side.


    1. Detach the 4 claws and remove the 2 assist grip plugs.

    2. A015DJ8

      Remove the 2 bolts.

    3. Detach the 2 claws and remove the rear assist grip.

  8. REMOVE CENTER PILLAR GARNISH LH

    A0159AD

    1. Remove the bolt.

    2. Detach the 2 clips and 2 guides.

    3. Pass the seat belt anchor through the center pillar garnish, and remove the center pillar garnish.

  9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH


    1. A015E24

      Remove the nut and shoulder anchor.

    2. A0157LY

      Remove the bolt and front seat outer belt assembly LH.

  10. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


    1. A015CMD

      Remove the 2 bolts and front shoulder belt anchor adjuster assembly.

  11. REMOVE FRONT SEAT OUTER LAP BELT SUB-ASSEMBLY


    1. A0156TW

      Remove the bolt and front seat outer lap belt sub-assembly.