Click here

FRONT SEAT INNER BELT ASSEMBLY (for Bench Seat Type) INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


    1. Install the front seat inner belt assembly LH with the nut.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat.

    2. Connect the connectors and attach the clamps.

      Table 1. Text in Illustration
      *1 Protruding Part
  2. Click here

    INSTALL FRONT SEAT INNER BELT ASSEMBLY RH


    1. Install the front seat inner belt assembly RH with the nut.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat.

      Table 2. Text in Illustration
      *1 Protruding Part
  3. Click here

    INSTALL FRONT SEAT INNER LAP BELT SUB-ASSEMBLY LH


    1. A015A7IE01

      Install the front seat inner lap belt sub-assembly LH with the bolt.

      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the seat belt to overlap the protruding part of the floor.

      Table 3. Text in Illustration
      *1 Protruding Part
  4. Click here

    INSTALL FRONT SEAT ASSEMBLY LH

    (Click here)

  5. Click here

    INSTALL FRONT SEAT ASSEMBLY RH

    (Click here)