REAR SEAT CUSHION HEATER (for 60/40 Split Seat Type 60 Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH


    1. Remove the rear No. 1 seat assembly Click here.

  2. REMOVE SEAT ADJUSTER BOLT COVER

    A01554I

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    A0155T5

    1. Remove the screw and release handle.

  4. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    A0155WKE01

    1. Remove the 2 screws.

    2. Detach the 3 claws in the order shown in the illustration, and then remove the cover.

  5. REMOVE REAR NO. 1 SEAT RECLINING COVER RH

    A015CKY

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  6. REMOVE UPPER SEAT TRACK RAIL COVER LH

    A0159XW

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE UPPER SEAT TRACK RAIL COVER RH

    A015BF3

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER


    1. A0156BB

      Remove the 4 screws and detach the 4 claws.

    2. A015AUN

      Remove the bolt that is securing the fold seat stopper band and remove the seat leg side cover together with the fold seat stopper band.

  9. REMOVE REAR NO. 2 SEAT PROTECTOR


    1. A0155UV

      w/ Rear Seat Side Airbag:

      Detach the claw and remove the wire harness connector.

    2. w/ Seat Heater System:

      Detach the claw and remove the wire harness connector.

    3. A015BO6

      Using a clip remover, remove the clip.

    4. Detach the claw and remove the seat protector from the seat hinge.

    5. Detach the 2 claws, open the protector and remove wire harness.

  10. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH


    1. A0157X7

      w/ Rear Seat Side Airbag:

      Detach the wire harness clamp.

    2. w/ Seat Heater System:

      Detach the wire harness clamp.

    3. Remove the 2 nuts and hinge.

    4. A0155TF

      Detach the cable clamp and disconnect the cable.

  11. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

    A015AE2

    1. Remove the 2 nuts and hinge.

  12. REMOVE SEAT BELT ANCHOR COVER CAP


    1. A01568Q

      Detach the claw and open the cap.

    2. A0159WX

      Remove the screw and anchor cover cap.

  13. REMOVE REAR SEATBACK STAY COVER LH

    A015E3G

    1. Remove the screw.

    2. Detach the 2 claws and remove the cover.

  14. REMOVE REAR UNDER SIDE COVER LH


    1. A0155YN

      Detach the 10 claws.

    2. A015CRP

      Remove the 5 screws.

    3. Detach the 2 clips and 2 claws, and remove the cover.

  15. REMOVE REAR SEAT CUSHION COVER RH

    A015D52

    1. Remove the 4 screws.

    2. Detach the 2 claws and remove the cover.

  16. REMOVE REAR SEAT UNDER TRAY COVER LH

    A01585Q

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  17. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    A0156VCE01

    1. Remove the bolt and belt.

      Tech Tips

      The No. 1 seat 3 point type belt anchor is fixed with the same bolt as the rear No. 1 seat inner belt LH. Therefore, it becomes disconnected when the bolt is removed.

  18. DISCONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    A0156NAE02

    1. Disconnect the belt anchor.

  19. REMOVE SEAT CUSHION COVER WITH PAD


    1. w/ Rear Seat Side Airbag:


      1. Detach the side airbag wire harness clamps.

      2. Remove the side airbag wire harness through the hole in the seat cushion.

    2. w/ Seat Heater System:


      1. A015DOT

        Disconnect the 2 seat heater connectors.

      2. A0159XP

        Remove the seatback heater wire harness through the hole in the seat cushion.

    3. Remove the seat cushion cover with pad.

  20. REMOVE REAR SEPARATE TYPE SEAT CUSHION COVER


    1. A015CKXE01

      Detach the 3 pieces of fastening tape.

    2. A015DMV

      Remove the hog rings and cover.

  21. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY

    A0157GG

    1. Cut off the tack pins which fasten the seat heater to the seat cushion cover, and then remove the seat cushion heater from the seat cushion cover.