REAR NO. 1 SEAT INNER BELT ASSEMBLY (for Bench Seat Type) INSTALLATION

INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

1. 

   Temporarily install the rear No. 1 seat inner belt assembly RH.

   Note:

   Do not allow the anchor part of the rear No. 1 seat inner belt assembly RH to overlap the protruding parts of the rear seat.

   Table 1. Text in Illustration

   *1	Protruding Part

INSTALL REAR SEAT OUTER BELT ASSEMBLY

1. 

   Install the rear seat outer belt assembly with the bolt.

   42 N*m

   428 kgf*cm

   31 ft.*lbf

   Note:

   Do not allow the anchor part of the rear No. 1 seat outer belt assembly to overlap the protruding parts of the rear seat inner belt assembly RH.

   Table 2. Text in Illustration

   *1	Protruding Part

INSTALL NO. 1 SEAT INNER BELT ASSEMBLY LH

1. 

   Temporarily install the rear No. 1 seat inner belt assembly LH.

   Note:

   Do not allow the anchor part of the rear No. 1 seat inner belt assembly LH to overlap the protruding parts of the rear seat.

   Table 3. Text in Illustration

   *1	Protruding Part

INSTALL REAR SEAT INNER BELT ASSEMBLY

1. 

   Install the rear seat inner belt assembly with the bolt.

   42 N*m

   428 kgf*cm

   31 ft.*lbf

   Note:

   Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the rear No. 1 seat inner belt assembly LH.

   Table 4. Text in Illustration

   *1	Protruding Part

2. 

   Close the 2 fasteners and attach the fastening tape.

   Table 5. Text in Illustration

   *1	Fastener
   *2	Fastening Tape

INSTALL REAR NO. 1 SEAT ASSEMBLY

(Click here)