REAR SEATBACK HEATER (for 60/40 Split Seat Type 40 Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH


    1. Remove the rear No. 1 seat assembly Click here.

  2. REMOVE SEAT ADJUSTER BOLT COVER

    A0159SB

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

    A0157PZ

    1. Remove the screw and release handle.

  4. REMOVE REAR NO. 1 SEAT RECLINING COVER RH

    A0156G2E01

    1. Remove the 2 screws.

    2. Detach the 3 claws in the order shown in the illustration, and then remove the cover.

  5. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    A0155OK

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  6. REMOVE UPPER SEAT TRACK RAIL COVER LH

    A015D8D

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE UPPER SEAT TRACK RAIL COVER RH

    A0156OW

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER


    1. A015A1T

      Remove the 4 screws and detach the 3 claws.

    2. A015A0P

      Remove the bolt that is securing the fold seat stopper band and remove the seat leg side cover together with the fold seat stopper band.

  9. REMOVE REAR NO. 2 SEAT PROTECTOR


    1. A0159RK

      w/ Rear Seat Side Airbag:

      Detach the claw and remove the wire harness connector.

    2. w/ Seat Heater System:

      Detach the claw and remove the wire harness connector.

    3. A0157OL

      Using a clip remover, remove the clip.

    4. Detach the claw and remove the seat protector from the seat hinge.

    5. Detach the 2 claws, open the protector and remove the wire harness.

  10. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH

    A0158E3

    1. Remove the 2 nuts and hinge.

  11. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

    A0157CR

    1. w/ Rear Seat Side Airbag:

      Detach the wire harness clamp.

    2. w/ Seat Heater System:

      Detach the wire harness clamp.

    3. Remove the 2 nuts and hinge.

    4. A0155TF

      Detach the cable clamp and disconnect the cable.

  12. REMOVE REAR SEAT COVER


    1. A015B8U

      Detach the 12 claws.

    2. A015BSB

      Remove the 3 screws.

    3. Detach the 2 claws and remove the cover.

  13. REMOVE REAR UNDER SIDE COVER LH

    A0157GR

    1. Remove the 5 screws.

    2. Detach the clip and 2 claws, and remove the cover.

  14. REMOVE REAR SEAT UNDER TRAY COVER RH

    A01585Q

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  15. REMOVE SEAT CUSHION COVER WITH PAD


    1. w/ Rear Seat Side Airbag:


      1. Detach the side airbag wire harness clamps.

      2. Remove the side airbag wire harness through the hole in the seat cushion.

    2. w/ Seat Heater System:


      1. A0158YQ

        Disconnect the 2 seat heater connectors.

      2. A0157EF

        Remove the seatback heater wire harness through the hole in the seat cushion.

    3. Remove the seat cushion cover with pad.

  16. REMOVE REAR SEATBACK COVER

    A015D4NE01

    1. Using a screwdriver, detach the 4 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  17. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH

    A01595A

    1. Detach the 2 claws on the top of the board.

    2. Pull up the board to detach the 2 claws on the bottom of the board and remove it.

  18. REMOVE REAR SEAT HEADREST ASSEMBLY

  19. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY

    A015C63

    1. Detach the 4 claws and remove the 2 supports.

  20. REMOVE SEATBACK COVER WITH PAD


    1. A015BVA

      Remove the hog rings.

    2. A015DLA

      w/ Rear Seat Side Airbag:


      1. Remove the cap nut and seatback cover bracket from the seat frame.

      2. Remove the side airbag wire harness through the hole in the seatback.

    3. w/ Seat Heater System:


      1. A0157H9E01

        Cut the cable tie and disconnect the seatback heater wire harness.

      2. A015B81

        Remove the seatback heater wire harness through the hole in the seatback.

    4. Remove the seatback cover with pad.

  21. REMOVE REAR SEPARATE TYPE SEATBACK COVER


    1. A01596V

      w/ Rear Seat Side Airbag:

      Disconnect the seatback cover bracket from the seatback pad.

    2. A0155QP

      Remove the hog rings and rear seatback cover.

  22. REMOVE REAR SEATBACK HEATER ASSEMBLY

    A015E4H

    1. Cut off the tack pins which fasten the seatback heater to the seatback cover, and then remove the seatback heater from the seatback cover.