CLIMATE CONTROL SEAT SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL SEAT HEATER SWITCH

    A015DZ7

    1. Attach the 2 claws to install the seat heater switch.

  2. INSTALL SUSPENSION CONTROL SWITCH


    1. A015CKQ

      Attach the 4 claws to install the suspension control switch.

    2. A0159MY

      Connect the 2 connectors.

    3. Attach the wire harness clamp.

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A015CZ0

      Connect the connectors.

    2. Attach the 14 claws to install the console panel.

  4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A015CM5

      Attach the 4 claws to install the box.

  5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A015C68

      Attach the 9 claws to install the panel.

  6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01574Y

      Connect the connectors.

    2. Attach the 7 claws to install the panel.

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

      A015D7FE01

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A015BRH

      Attach the 7 claws to install the panel pad.

    2. Install the screw.

    3. Install the clip.

  9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION


    1. A01556Z

      Attach the 7 claws to install the panel cushion.

  10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A015D40

      Connect the connectors and 2 clamps.

    2. Attach the 8 claws to install the panel pad.

    3. Install the screw.

    4. Install the clip.

  11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. A015DQB

      Attach the 7 claws to install the panel cushion.

  12. INSPECT SEAT HEATER SYSTEM


    1. Check the seat heater operation.


      1. Turn the engine switch on (IG).

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.

  13. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)


    1. Check the climate control seat operation.


      1. When the climate control seat switch is turned on, check that the seat heater and blower operate based on the seat temperature.

      2. If the seat temperature increases as a result of the seat heater operation, check that the seat heater operation stops and the blower operation continues.

        Tech Tips

        Based on the cabin temperature, seat temperature, etc., the seat heater operation time varies.