SEAT HEATER SWITCH (w/ Seat Heater System) INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL SEAT HEATER SWITCH

    A015DZ7

    1. Attach the 2 claws to install the heater switch.

  2. INSTALL SUSPENSION CONTROL SWITCH


    1. A015CKQ

      Attach the 4 claws to install the control switch.

    2. A0159MY

      Connect the 2 connectors.

    3. Attach the wire harness clamp.

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A015CZ0

      Connect the connectors.

    2. Attach the 14 claws to install the console panel.

  4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A015CM5

      Attach the 4 claws to install the box.

  5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A015C68

      Attach the 9 claws to install the panel.

  6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01574Y

      Connect the connectors.

    2. Attach the 7 claws to install the panel.

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

      A015D7FE01

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A015BRH

      Attach the 7 claws to install the panel pad.

    2. Install the screw.

    3. Install the clip.

  9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION


    1. A01556Z

      Attach the 7 claws to install the panel cushion.

  10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A015D40

      Connect the connectors and 2 clamps.

    2. Attach the 8 claws to install the panel pad.

    3. Install the screw.

    4. Install the clip.

  11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


    1. A015DQB

      Attach the 7 claws to install the panel cushion.