LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Power Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A015C6IE02
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using a screwdriver, detach the 2 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB

    A01583XE02
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH

    A015BJU

    1. Remove the 2 screws.

    2. Disconnect the 2 rubber bands.

    3. A01597V

      Remove the 3 screws.

    4. Detach the 2 claws and remove the front seat cushion shield LH together with the front inner No. 1 seat cushion shield LH.

    5. for Driver Side:

      Disconnect the connector.

  5. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    1. Disconnect the connectors and detach the clamps.

    2. A015D87

      Remove the nut and front seat inner belt assembly.

  6. REMOVE FRONT INNER SEAT CUSHION SHIELD LH

    A015D8W

    1. Remove the screw.

    2. Detach the 2 claws and clip, and then remove the front inner seat cushion shield LH.

  7. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    A015BS5

    1. Remove the 2 screws.

    2. Move the front seatback board sub-assembly LH in the direction of the arrow to detach the 2 hooks and remove it.

  8. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System)

    A0155SG

    1. Detach the 2 claws and disconnect the seat climate control blower LH.

    2. Detach the 4 hooks and remove the seat climate control controller LH.

  9. REMOVE FRONT SEAT HEADREST SUPPORT

    A0156HC

    1. Detach the 4 claws and remove the 2 front seat headrest supports.

  10. REMOVE SEATBACK COVER WITH PAD


    1. A015DQN

      w/o Climate Control Seat System:

      Disconnect the connector and detach the 2 wire harness clamps.

    2. A015CAP

      w/ Climate Control Seat System:

      Disconnect the 2 connectors and detach the 4 wire harness clamps.

    3. A0159VTE02
      Text in Illustration
      *1 Hog Ring

      Remove the hog rings.

    4. A015APX
      Text in Illustration
      *1 Seatback Cover Bracket

      Remove the nut and detach the seatback cover bracket.

    5. Detach the hooks and remove the seatback cover with pad.

  11. REMOVE FRONT SEATBACK PROTECTOR

    A015CB8E01
    Text in Illustration
    *1 Double-sided Tape

    1. Remove the front seatback protector.

    2. Remove any remaining double-sided tape.

  12. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    1. A015DVRE01
      Text in Illustration
      *1 Cable Clamp
      *2 Hook

      Remove the cable clamp and disconnect the active headrest cable from the seatback spring.

    2. Remove the 4 springs.

    3. Detach the 4 hooks and remove the seatback spring.

    4. A015561

      Disconnect the connector.

    5. Remove the 2 screws and lumbar support adjuster assembly LH.