LUMBAR SWITCH (for Power Seat) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL LUMBAR SWITCH (for Driver Side)

    A0156DM

    1. Install the switch with the 2 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD LH


    1. for Driver Side:

      Connect the connector.

    2. A01597V

      Attach the 2 claws to install the front seat cushion shield LH together with the front inner No. 1 cushion shield LH.

    3. Install the 3 screws.

    4. A015BJU

      Connect the 2 rubber bands.

    5. Install the 2 screws.

  3. INSTALL RECLINING POWER SEAT SWITCH KNOB

    A015CTQ

    1. Attach the 2 claws to install the reclining power seat switch knob.

  4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A0158S6

    1. Attach the 2 claws to install the slide and vertical power seat switch knob.

  5. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly Click here.