LUMBAR SWITCH (for Power Seat) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE FRONT SEAT ASSEMBLY LH


    1. Remove the front seat assembly Click here.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A015C6IE02
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using a screwdriver, detach the 2 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB

    A01583XE02
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH

    A015BJU

    1. Remove the 2 screws.

    2. Disconnect the 2 rubber bands.

    3. A01597V

      Remove the 3 screws.

    4. Detach the 2 claws and remove the front seat cushion shield LH together with the front inner No. 1 seat cushion shield LH.

    5. for Driver Side:

      Disconnect the connector.

  5. REMOVE LUMBAR SWITCH (for Driver Side)

    A0156DM

    1. Remove the 2 screws and switch.