POWER SEAT SWITCH (w/o Seat Position Memory System) INSPECTION


  1. INSPECT FRONT POWER SEAT SWITCH LH

    A015AGEE05

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Slide Switch
      Tester Connection Switch Condition Specified Condition
      9 (SLD+) - 1 (+B) Front Below 1 Ω
      6 (SLD-) - 4 (GND)
      9 (SLD+) - 4 (GND) Off
      6 (SLD-) - 4 (GND)
      9 (SLD+) - 4 (GND) Rear
      6 (SLD-) - 1 (+B)
      Front Vertical Switch
      Tester Connection Switch Condition Specified Condition
      10 (FRV+) - 1 (+B) Up Below 1 Ω
      5 (FRV-) - 4 (GND)
      10 (FRV+) - 4 (GND) Off
      5 (FRV-) - 4 (GND)
      10 (FRV+) - 4 (GND) Down
      5 (FRV-) - 1 (+B)
      Lifter Switch
      Tester Connection Switch Condition Specified Condition
      7 (LFT+) - 1 (+B) Up Below 1 Ω
      8 (LFT-) - 4 (GND)
      7 (LFT+) - 4 (GND) Off
      8 (LFT-) - 4 (GND)
      7 (LFT+) - 4 (GND) Down
      8 (LFT-) - 1 (+B)
      Reclining Switch
      Tester Connection Switch Condition Specified Condition
      3 (RCL+) - 1 (+B) Front Below 1 Ω
      2 (RCL-) - 4 (GND)
      3 (RCL+) - 4 (GND) Off
      2 (RCL-) - 4 (GND)
      3 (RCL+) - 4 (GND) Rear
      2 (RCL-) - 1 (+B)

      If the result is not as specified, replace the front power seat switch.

  2. INSPECT FRONT POWER SEAT SWITCH RH

    A0157CCE01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Slide Switch
      Tester Connection Switch Condition Specified Condition
      9 (SLD+) - 1 (+B) Front Below 1 Ω
      6 (SLD-) - 4 (GND)
      9 (SLD+) - 4 (GND) Off
      6 (SLD-) - 4 (GND)
      9 (SLD+) - 4 (GND) Rear
      6 (SLD-) - 1 (+B)
      Front Vertical Switch
      Tester Connection Switch Condition Specified Condition
      5 (FRV+) - 1 (+B) Up Below 1 Ω
      10 (FRV-) - 4 (GND)
      5 (FRV+) - 4 (GND) Off
      10 (FRV-) - 4 (GND)
      5 (FRV+) - 4 (GND) Down
      10 (FRV-) - 1 (+B)
      Lifter Switch
      Tester Connection Switch Condition Specified Condition
      8 (LFT+) - 1 (+B) Up Below 1 Ω
      7 (LFT-) - 4 (GND)
      8 (LFT+) - 4 (GND) Off
      7 (LFT-) - 4 (GND)
      8 (LFT+) - 4 (GND) Down
      7 (LFT-) - 1 (+B)
      Reclining Switch
      Tester Connection Switch Condition Specified Condition
      3 (RCL+) - 1 (+B) Front Below 1 Ω
      2 (RCL-) - 4 (GND)
      3 (RCL+) - 4 (GND) Off
      2 (RCL-) - 4 (GND)
      3 (RCL+) - 4 (GND) Rear
      2 (RCL-) - 1 (+B)

      If the result is not as specified, replace the front power seat switch.