REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type) REASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY


    1. Install the release handle with the bolt.

  2. INSTALL REAR SEATBACK LOCK STRIKER COVER LH


    1. Attach the 2 clamps to install the cover.

  3. INSTALL REAR NO. 2 SEATBACK COVER LH


    1. Attach the 3 claws to install the cover.

  4. INSTALL REAR SEATBACK LOCK STRIKER ASSEMBLY LH

    A0159JK

    1. Install the lock striker with the 2 nuts.

      Torque:
      14 N*m  { 138 kgf*cm, 10 ft.*lbf }

  5. INSTALL REAR SEAT LOCK CONTROL CABLE

    A015BNM

    1. Attach the 2 clamps to install the lock control cable.

    2. Attach the 2 cable clamps to connect the 2 cables.

  6. INSTALL REAR INNER SEAT RECLINING COVER RH

    A015771

    1. Attach the claw to install the cover.

    2. Install the screw.

  7. INSTALL REAR INNER SEAT RECLINING COVER LH


    1. Attach the claw to install the cover.

    2. Install the screw.

  8. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH

    A015E0XE02
    Text in Illustration
    *1 Hog Ring Pliers

    1. Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  9. INSTALL SEATBACK COVER WITH PAD


    1. A015CL1

      Using hog ring pliers, install the seatback cover with pad to the seatback frame with a new hog rings.

    2. LH Side:


      1. w/ Rear Center Seat Headrest:


        1. A01590I

          Attach the 8 claws to install the 4 headrest supports.

        2. Install the rear seat protector.

        3. A0157GE

          Insert the center headrest storage bag.

        4. A015E2G

          Attach the 2 hooks.

        5. A0159G0

          Close the fastener.

      2. w/o Rear Center Seat Headrest:


        1. A0155DO

          Attach the 4 claws to install the 2 headrest supports.

        2. Install the rear seat protector.

        3. A015API

          Attach the hook.

    3. RH Side:


      1. A0155F2

        Attach the 4 claws to install the 2 headrest supports.

      2. Install the rear seat protector.

      3. A0157PN

        Attach the hook.

  10. INSTALL REAR SEAT HEADREST HANDLE


    1. Install the snap ring to the headrest handle.

    2. A015818

      Install the headrest handle to the headrest.

  11. INSTALL REAR SEAT HEADREST ASSEMBLY (w/ Folding Headrest)

    A015D9ME02
    Text in Illustration
    *1 Protective Tape

    1. While releasing the lock inside the headrest support with a screwdriver, install the headrest.

      Tech Tips

      Tape the screwdriver tip before use.

  12. INSTALL REAR SEAT HEADREST ASSEMBLY (w/o Folding Headrest)

  13. INSTALL REAR SEAT HINGE PAWL GUIDE

    A01591G

    1. Install the guide with the screw.

  14. INSTALL REAR SEAT HINGE PAWL GUIDE

    A0158CL

    1. Attach the 5 claws to install the guide.

  15. INSTALL REAR LOWER SEATBACK LOCK BEZEL

    A0155JH

    1. Attach the 3 claws and clip to install the seatback lock bezel.

  16. INSTALL REAR NO. 2 SEATBACK CUSHION

    A0155EE

    1. Install the seatback cushion with the screw.

  17. INSTALL NO. 3 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY


    1. A015E0V

      Attach the 2 clamps to install the 2 cables.

    2. A015AUI

      Attach the 2 cable clamps to connect the 2 cables.

  18. INSTALL NO. 2 SEAT STAY SUB-ASSEMBLY

    A0155LM

    1. Install the seat stay with the bolt.

  19. INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH


    1. A0155X1E01
      Text in Illustration
      *1 Hog Ring Pliers
      *2 Fastening Tape

      w/o Bottle Holder:


      1. Attach the fastening tape to install the seatback cover.

      2. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

        Note


        • Be careful not to damage the cover.

        • When installing the hog rings, avoid wrinkling the cover.

    2. A015A8XE01
      Text in Illustration
      *1 Hog Ring Pliers
      *2 Fastening Tape

      w/ Bottle Holder:


      1. Attach the 3 fastening tapes to install the seatback cover.

      2. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

        Note


        • Be careful not to damage the cover.

        • When installing the hog rings, avoid wrinkling the cover.

  20. INSTALL NO. 3 SEAT CUSHION PAD LH

  21. INSTALL SEAT CUSHION COVER WITH PAD

  22. INSTALL NO. 2 BOTTLE HOLDER


    1. A015DKE

      Install the No. 2 bottle holder with the 2 screws.

  23. INSTALL CAP


    1. A015A0W

      Attach the 4 claws to install the 2 caps.

  24. INSTALL REAR SEAT CUSHION CARPET

    A0157EN

    1. Install the seat cushion carpet with new tack pins.

  25. INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY


    1. Install the 2 belts.

      A015B7KE01

      Note


      • Make sure the claws are facing away from the seat.

      • Do not overlap the anchor part of the seat belt and protruding parts of the seat.

  26. INSTALL REAR CENTER SEAT INNER BELT LH (w/ Rear Center Seat Headrest)

    A0156R1E01

    1. Install the belt with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the seat.

      Tech Tips

      The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, connect it when installing the rear seat inner belt.

  27. INSTALL REAR CENTER SEAT INNER BELT RH (w/ Rear Center Seat Headrest)

    A0159PQE01

    1. Install the belt with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the seat.

      Tech Tips

      The rear No. 2 seat inner belt is fixed with the same nut as the rear seat outer belt. Therefore, connect it when installing the rear seat outer belt.

  28. INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH


    1. A0157JC

      Attach the cable clamp to connect the cable.

    2. A015CYT

      Attach the claw to install the release lever.

    3. Install the screw.

  29. INSTALL SEAT STAND FRAME CAP

    A015BVF

    1. Attach the 2 claws to install the stand frame cap.

  30. INSTALL REAR SEAT LOCK COVER LH

    A015DWG

    1. Attach the 2 clamps to install the cover.

    2. Install the 2 screws.

  31. INSTALL NO. 3 SEAT LEG COVER NO. 2

    A0157RI

    1. Attach the 4 claws to install the cover.

    2. Install the 2 screws.

  32. INSTALL NO. 3 SEAT FRONT BRACKET COVER LH

    A0157H5

    1. Attach the 4 claws to install the cover.

  33. INSTALL REAR SEAT CUSHION UNDER COVER LH


    1. A015DYS

      Install the cover with the 7 screws.

    2. A015835

      Attach the 16 claws.

  34. INSTALL 3RD SEAT CUSHION LOCK COVER

    A015AJM

    1. Attach the 4 claws to install the 2 covers.

  35. INSTALL 3RD SEAT LINK SUB-ASSEMBLY LH

    A015CIH

    1. Install the seat link with the bolt and nut.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  36. INSTALL NO. 2 SEAT LEG COVER NO. 2

    A015BA3

    1. Install the seat leg cover with the screw.

  37. INSTALL REAR NO. 3 SEAT LEG COVER LH


    1. A015BQP

      Install the seat leg cover with the 2 screws.

    2. A015CGW

      Install the spring of the seat stay ball-joint.

    3. Connect the seat stay to the seat frame.

  38. INSTALL REAR SEAT REAR BRACKET COVER REAR


    1. Attach the 2 claws to install the cover.

  39. INSTALL RECLINING ADJUSTER COVER RH

    A0156OIE02

    1. Attach the 5 claws in the order shown in the illustration to install the cover.

    2. Install the screw.

  40. INSTALL RECLINING ADJUSTER COVER LH

    A015C95E02

    1. Attach the 3 claws in the order shown in the illustration to install the cover.

    2. Install the screw.

  41. INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH

    A015C2M

    1. Install the release handle with the screw.

  42. INSTALL SEAT ADJUSTER BOLT COVER

    A0159ZM

    1. Attach the 2 claws to install the cover.