Click here

REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type) DISASSEMBLY

Click here
Click here Click here
CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    REMOVE SEAT ADJUSTER BOLT COVER


    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 1. Text in Illustration
      *1 Protective Tape
  2. Click here

    REMOVE NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH


    1. Remove the screw and release handle.

  3. Click here

    REMOVE RECLINING ADJUSTER COVER LH


    1. Remove the screw.

    2. Detach the 3 claws in the order shown in the illustration, and then remove the cover.

  4. Click here

    REMOVE RECLINING ADJUSTER COVER RH


    1. Remove the screw.

    2. Detach the 5 claws in the order shown in the illustration, and then remove the cover.

  5. Click here

    REMOVE REAR SEAT REAR BRACKET COVER REAR


    1. Detach the 2 claws and cover.

  6. Click here

    REMOVE REAR NO. 3 SEAT LEG COVER LH


    1. A0158OY

      Using a screwdriver, remove the spring of the seat stay ball-joint.

    2. Disconnect the seat stay.

    3. A015BQP

      Remove the 2 screws and cover.

  7. Click here

    REMOVE NO. 2 SEAT LEG COVER NO. 2


    1. A015BA3

      Remove the screw and seat leg cover.

  8. Click here

    REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH


    1. Remove the bolt, nut and seat link.

  9. Click here

    REMOVE 3RD SEAT CUSHION LOCK COVER


    1. Detach the 4 claws and remove the 2 covers.

  10. Click here

    REMOVE REAR SEAT CUSHION UNDER COVER LH


    1. A015835

      Detach the 16 claws.

    2. A015DYS

      Remove the 7 screws and cover.

  11. Click here

    REMOVE NO. 3 SEAT FRONT BRACKET COVER LH


    1. Detach the 4 claws and remove the cover.

  12. Click here

    REMOVE NO. 3 SEAT LEG COVER NO. 2


    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  13. Click here

    REMOVE REAR SEAT LOCK COVER LH


    1. Remove the 2 screws.

    2. Detach the 2 clamps and remove the 2 covers.

  14. Click here

    REMOVE SEAT STAND FRAME CAP


    1. Using a screwdriver, detach the 2 claws and remove the stand frame cap.

      Tip:

      Tape the screwdriver tip before use.

      Table 2. Text in Illustration
      *1 Protective Tape
  15. Click here

    REMOVE SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH


    1. A015CYT

      Remove the screw.

    2. Detach the claw and remove the release lever.

    3. A0157JC

      Detach the cable clamp and disconnect the cable.

  16. Click here

    REMOVE REAR CENTER SEAT INNER BELT LH (w/ Rear Center Seat Headrest)


    1. Remove the nut and belt.

      Tip:

      The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, it becomes disconnected when the nut is removed.

  17. Click here

    REMOVE REAR CENTER SEAT INNER BELT RH (w/ Rear Center Seat Headrest)


    1. Remove the belt.

  18. Click here

    REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY


    1. Remove the nut and belt.

      Tip:

      The rear No. 2 seat inner belt is fixed with the same nut as the rear seat outer belt. Therefore, it becomes disconnected when the nut is removed.

  19. Click here

    REMOVE REAR SEAT CUSHION CARPET


    1. Cut off the tack pins which fasten the seat cushion carpet to the seat cushion pad, and then remove the seat cushion carpet from the seat cushion pad.

  20. Click here

    REMOVE CAP


    1. A015A0W

      Detach the 4 claws and remove the 2 caps.

  21. Click here

    REMOVE NO. 2 BOTTLE HOLDER


    1. A015DKE

      Remove the 2 screws and No. 2 bottle holder.

  22. Click here

    REMOVE SEAT CUSHION COVER WITH PAD

  23. Click here

    REMOVE NO. 3 SEAT CUSHION PAD LH

  24. Click here

    REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH


    1. w/o Bottle Holder:


      1. A015B7ME01

        Remove the hog rings.

      2. Detach the fastening tape and remove the seat cushion cover.

        Table 3. Text in Illustration
        *1 Fastening Tape

    2. w/ Bottle Holder:


      1. A015BKCE01

        Remove the hog rings.

      2. Detach the 3 fastening tapes and remove the seat cushion cover.

        Table 4. Text in Illustration
        *1 Fastening Tape
  25. Click here

    REMOVE NO. 2 SEAT STAY SUB-ASSEMBLY


    1. Remove the bolt and seat stay.

  26. Click here

    REMOVE NO. 3 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY


    1. A015AUI

      Detach the 2 cable clamps and disconnect the 2 cables.

    2. A015E0V

      Detach the 2 clamps and remove the cable.

  27. Click here

    REMOVE REAR NO. 2 SEATBACK CUSHION


    1. Remove the screw and seatback cushion.

  28. Click here

    REMOVE REAR LOWER SEATBACK LOCK BEZEL


    1. Detach the 3 claws and clip, and then remove the seatback lock bezel.

  29. Click here

    REMOVE REAR SEAT HINGE PAWL GUIDE


    1. Detach the 5 claws and remove the guide.

  30. Click here

    REMOVE REAR SEAT HINGE PAWL GUIDE


    1. Remove the screw and guide.

  31. Click here

    REMOVE REAR SEAT HEADREST ASSEMBLY (w/ Folding Headrest)


    1. While releasing the lock inside the headrest support with a screwdriver, remove the headrest.

      Tip:

      Tape the screwdriver tip before use.

      Table 5. Text in Illustration
      *1 Protective Tape
  32. Click here

    REMOVE REAR SEAT HEADREST ASSEMBLY (w/o Folding Headrest)

  33. Click here

    REMOVE REAR SEAT HEADREST HANDLE


    1. Remove the snap ring and headrest handle.

  34. Click here

    REMOVE SEATBACK COVER WITH PAD


    1. LH Side:


      1. w/ Rear Center Headrest:


        1. A015DR1

          Open the fastener.

        2. A015E2G

          Detach the 2 hooks.

        3. A0158XV

          Pull out the center headrest storage bag.

        4. Remove the rear seat protector.

        5. A01590I

          Detach the 8 claws and remove the 4 headrest supports.

      2. w/o Rear Center Headrest:


        1. A015API

          Detach the hook.

        2. Remove the rear seat protector.

        3. A0155DO

          Detach the 4 claws and remove the 2 headrest supports.

    2. RH Side:


      1. A0157PN

        Detach the hook.

      2. Remove the rear seat protector.

      3. A0155F2

        Detach the 4 claws and remove the 2 headrest supports.

    3. A015CL1

      Remove the hog ring and seatback cover with pad.

  35. Click here

    REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY LH


    1. Remove the hog rings and seatback cover.

  36. Click here

    REMOVE REAR INNER SEAT RECLINING COVER LH


    1. Remove the screw.

    2. Detach the claw and remove the cover.

  37. Click here

    REMOVE REAR INNER SEAT RECLINING COVER RH


    1. Remove the screw.

    2. Detach the claw and remove the cover.

  38. Click here

    REMOVE REAR SEAT LOCK CONTROL CABLE


    1. Detach the 2 cable clamps and disconnect the 2 cables.

    2. Detach the 2 clamps and remove the lock control cable.

  39. Click here

    REMOVE REAR SEATBACK LOCK STRIKER ASSEMBLY LH


    1. Remove the 2 nuts and lock striker.

  40. Click here

    REMOVE REAR NO. 2 SEATBACK COVER LH


    1. Detach the 3 claws and remove the cover.

  41. Click here

    REMOVE REAR SEATBACK LOCK STRIKER COVER LH


    1. Detach the 2 clamps and remove the cover.

  42. Click here

    REMOVE NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY


    1. Remove the bolt and release handle.