REAR NO. 1 SEAT ASSEMBLY (for Bench Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR SEAT NO. 3 CUSHION HINGE COVER

    A015BVQ

    1. Detach the 6 claws and remove the rear seat No. 3 cushion hinge cover.

  2. REMOVE REAR SEAT NO. 4 CUSHION HINGE COVER

    A0157U8

    1. Detach the 6 claws and remove the rear seat No. 4 cushion hinge cover.

  3. REMOVE REAR SEAT NO. 1 CUSHION HINGE COVER


    1. Operate the reclining remote control lever knob and fold down the rear No. 1 seat assembly.

    2. A0159RX

      Detach the 3 claws and remove the rear seat No. 1 cushion hinge cover.

  4. REMOVE REAR SEAT NO. 2 CUSHION HINGE COVER

    A015AYN

    1. Detach the 3 claws and remove the rear seat No. 2 cushion hinge cover.

  5. REMOVE REAR NO. 1 SEAT ASSEMBLY


    1. Return the rear No. 1 seat assembly to its original position.

    2. A015DRF

      Remove the 2 bolts.

    3. Operate the reclining remote control lever knob and fold down the rear No. 1 seat assembly.

    4. A015CB3

      Remove the 2 bolts and rear No. 1 seat assembly from the vehicle.

      Note

      Be careful not to damage the vehicle body.

  6. REMOVE REAR STEP COVER

    A0159DZ

    Tech Tips

    Use the same procedure to remove the step cover on the other side.


    1. Detach the 2 claws and remove the step cover.

  7. REMOVE REAR DOOR SCUFF PLATE LH

    A015BJQ

    1. Remove the screw.

    2. Detach the 3 claws and 4 clips, and remove the scuff plate.

  8. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  9. REMOVE REAR SEAT NO. 2 PROTECTOR

    Tech Tips

    Use the same procedure to remove the rear seat No. 2 protector on the other side.


    1. A0155IS

      Detach the 4 claws and remove the rear seat No. 2 protector from the rear seat cushion lock striker sub-assembly.

  10. REMOVE REAR SEAT CUSHION LOCK STRIKER SUB-ASSEMBLY

    Tech Tips

    Use the same procedure to remove the rear seat cushion lock striker sub-assembly on the other side.


    1. A0155ZH

      Detach the fastener and fold back the front floor carpet.

    2. A015ASK

      Fold back the rear floor silencer.

    3. A01583H

      Remove the 2 bolts and rear seat cushion lock striker sub-assembly.

  11. REMOVE REAR SEAT CUSHION HOLDER BRACKET

    Tech Tips

    Use the same procedure to remove the rear seat cushion holder bracket on the other side.


    1. A01577S

      Remove the 2 bolts and rear seat cushion holder bracket.