Click here

REAR NO. 1 SEAT ASSEMBLY (for Bench Seat Type) REMOVAL

Click here
Click here Click here
CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Click here
  1. Click here

    REMOVE REAR SEAT NO. 3 CUSHION HINGE COVER


    1. Detach the 6 claws and remove the rear seat No. 3 cushion hinge cover.

  2. Click here

    REMOVE REAR SEAT NO. 4 CUSHION HINGE COVER


    1. Detach the 6 claws and remove the rear seat No. 4 cushion hinge cover.

  3. Click here

    REMOVE REAR SEAT NO. 1 CUSHION HINGE COVER


    1. Operate the reclining remote control lever knob and fold down the rear No. 1 seat assembly.

    2. A0159RX

      Detach the 3 claws and remove the rear seat No. 1 cushion hinge cover.

  4. Click here

    REMOVE REAR SEAT NO. 2 CUSHION HINGE COVER


    1. Detach the 3 claws and remove the rear seat No. 2 cushion hinge cover.

  5. Click here

    REMOVE REAR NO. 1 SEAT ASSEMBLY


    1. Return the rear No. 1 seat assembly to its original position.

    2. A015DRF

      Remove the 2 bolts.

    3. Operate the reclining remote control lever knob and fold down the rear No. 1 seat assembly.

    4. A015CB3

      Remove the 2 bolts and rear No. 1 seat assembly from the vehicle.

      Note:

      Be careful not to damage the vehicle body.

  6. Click here

    REMOVE REAR STEP COVER

    Tip:

    Use the same procedure to remove the step cover on the other side.


    1. Detach the 2 claws and remove the step cover.

  7. Click here

    REMOVE REAR DOOR SCUFF PLATE LH


    1. Remove the screw.

    2. Detach the 3 claws and 4 clips, and remove the scuff plate.

  8. Click here

    REMOVE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedures described for the LH side.

  9. Click here

    REMOVE REAR SEAT NO. 2 PROTECTOR

    Tip:

    Use the same procedure to remove the rear seat No. 2 protector on the other side.


    1. A0155IS

      Detach the 4 claws and remove the rear seat No. 2 protector from the rear seat cushion lock striker sub-assembly.

  10. Click here

    REMOVE REAR SEAT CUSHION LOCK STRIKER SUB-ASSEMBLY

    Tip:

    Use the same procedure to remove the rear seat cushion lock striker sub-assembly on the other side.


    1. A0155ZH

      Detach the fastener and fold back the front floor carpet.

    2. A015ASK

      Fold back the rear floor silencer.

    3. A01583H

      Remove the 2 bolts and rear seat cushion lock striker sub-assembly.

  11. Click here

    REMOVE REAR SEAT CUSHION HOLDER BRACKET

    Tip:

    Use the same procedure to remove the rear seat cushion holder bracket on the other side.


    1. A01577S

      Remove the 2 bolts and rear seat cushion holder bracket.