Click here

FRONT SEAT ASSEMBLY (for Bench Seat Type) INSTALLATION

Click here
Click here Click here
CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL FRONT SEAT ASSEMBLY RH


    1. Place the front seat assembly RH in the cabin.

      Note:

      Be careful not to damage the vehicle body.

    2. Temporarily install the front seat assembly RH with the 4 bolts.

    3. Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.

    4. A015832E01

      Tighten the 2 bolts in the order shown in the illustration.

      37 N*m 377 kgf*cm 27 ft.*lbf

    5. Operate the seat track adjusting handle and move the front seat assembly RH to the foremost position.

    6. A015883E01

      Tighten the 2 bolts in the order shown in the illustration.

      37 N*m 377 kgf*cm 27 ft.*lbf
    7. A015CMN

      Pass the front seat lap type belt assembly through the hole of the front seat cushion to the surface.

  2. Click here

    INSTALL FRONT SEAT INNER TRACK COVER RH


    1. Attach the 2 guides.

    2. Attach the 2 claws and clip to install the front seat inner track cover RH.

  3. Click here

    INSTALL FRONT SEAT OUTER TRACK COVER RH


    1. Attach the 2 guides.

    2. Attach the 2 claws and clip to install the front seat outer track cover RH.

  4. Click here

    INSTALL FRONT SEAT INNER TRACK BRACKET COVER RH


    1. Operate the seat track adjusting handle and move the front seat assembly RH to the rearmost position.

    2. Attach the 4 claws to install the front seat inner track bracket cover RH.

  5. Click here

    INSTALL FRONT SEAT OUTER TRACK BRACKET COVER RH


    1. Attach the 4 claws to install the front seat outer track bracket cover RH.

  6. Click here

    INSTALL FRONT SEAT HEADREST ASSEMBLY


    1. Install the front seat headrest assembly.