FRONT SEAT ASSEMBLY (for Power Seat) DISASSEMBLY

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A015C6IE02
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using a screwdriver, detach the 2 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE RECLINING POWER SEAT SWITCH KNOB

    A01583XE02
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE FRONT SEAT CUSHION SHIELD LH

    A015BJU

    1. Remove the 2 screws.

    2. Disconnect the 2 rubber bands.

    3. A01597V

      Remove the 3 screws.

    4. Detach the 2 claws and remove the front seat cushion shield LH together with the front inner No. 1 seat cushion shield LH.

    5. for Driver Side:

      Disconnect the connector.

  4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD LH

    A0159RQ

    1. Remove the screw.

    2. Detach the claw and remove the front inner No. 1 seat cushion shield LH from the front seat cushion shield LH.

  5. REMOVE LUMBAR SWITCH (for Driver Side)

    A0156DM

    1. Remove the 2 screws and lumbar switch from the front seat cushion shield LH.

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    1. Disconnect the connectors and detach the clamps.

    2. A015D87

      Remove the nut and front seat inner belt assembly.

  7. REMOVE FRONT INNER SEAT CUSHION SHIELD LH

    A015D8W

    1. Remove the screw.

    2. Detach the 2 claws and clip, and then remove the front inner seat cushion shield LH.

  8. REMOVE FRONT POWER SEAT SWITCH LH


    1. w/ Seat Position Memory System:

      Disconnect the 2 connectors.

    2. w/o Seat Position Memory System:

      Disconnect the connector.

    3. A01573W

      Remove the 3 screws and front power seat switch LH.

  9. REMOVE SEAT CUSHION COVER WITH PAD


    1. A0156MR

      Using a clip remover, remove the 2 clips.

    2. w/o Climate Control Seat System:


      1. A015DQN

        Disconnect the connector and detach the 2 wire harness clamps.

      2. A015CS8

        Disconnect the connector and detach the wire harness clamp.

    3. w/ Climate Control Seat System:


      1. A015CAP

        Disconnect the 2 connectors and detach the 4 wire harness clamps.

      2. A015B5P

        Detach the wire harness clamp.

    4. for Front Passenger Side:


      1. A0157NX

        Disconnect the connector.

      2. Detach the 2 clamps and remove the connector holder.

    5. A015ADQ

      Bend the 2 seat frame claws upward.

    6. Detach the hooks and remove the seat cushion cover with pad.

  10. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER


    1. A015C91

      Remove the hog rings and front separate type seat cushion cover from the front separate type seat cushion pad.

  11. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH (w/ Seat Heater System)


    1. A015DPP

      w/o Climate Control Seat System:

      Cut off the tack pins and remove the front seat cushion heater assembly LH from the front separate type seat cushion cover.

    2. A015A28

      w/ Climate Control Seat System:

      Cut off the tack pins and remove the front seat cushion heater assembly LH from the front separate type seat cushion cover.

  12. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    A015BS5

    1. Remove the 2 screws.

    2. Move the front seatback board sub-assembly LH in the direction of the arrow to detach the 2 hooks and remove it.

  13. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System, for Seatback)

    A0155SG

    1. Detach the 2 claws and disconnect the seat climate control blower LH.

    2. Detach the 4 hooks and remove the seat climate control controller LH.

  14. REMOVE FRONT SEAT HEADREST SUPPORT

    A0156HC

    1. Detach the 4 claws and remove the 2 front seat headrest supports.

  15. REMOVE SEATBACK COVER WITH PAD


    1. A0159VTE02
      Text in Illustration
      *1 Hog Ring

      Remove the hog rings.

    2. A015APXE01
      Text in Illustration
      *1 Seatback Cover Bracket

      Remove the nut and detach the seatback cover bracket.

    3. Detach the hooks and remove the seatback cover with pad.

  16. REMOVE FRONT SEPARATE TYPE SEATBACK COVER


    1. A015BXKE01
      Text in Illustration
      *1 Seatback Cover Bracket

      Pass the seatback cover bracket through the hole of the front separate type seatback pad.

    2. A015CVUE02
      Text in Illustration
      *1 Fastening Tape

      Remove the hog rings.

    3. Detach the fastening tape and remove the front separate type seatback cover from the front separate type seatback pad.

  17. REMOVE FRONT SEPARATE TYPE SEATBACK COVER (w/ Climate Control Seat System)


    1. A015BXKE01
      Text in Illustration
      *1 Seatback Cover Bracket

      Pass the seatback cover bracket through the hole of the front separate type seatback pad.

    2. A01588R

      Remove the hog rings and front separate type seatback cover from the front separate type seatback pad.

  18. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH (w/ Seat Heater System)


    1. A0155XX

      w/o Climate Control Seat System:

      Cut off the tack pins and remove the front seatback heater assembly LH from the front separate type seatback cover.

    2. A015BQC

      w/ Climate Control Seat System:

      Cut off the tack pins and remove the front seatback heater assembly LH from the front separate type seatback cover.

  19. REMOVE FRONT SEATBACK PROTECTOR

    A015CB8E01
    Text in Illustration
    *1 Double-sided Tape

    1. Remove the front seatback protector.

    2. Remove any remaining double-sided tape.

  20. REMOVE OUTSIDE RECLINING ADJUSTER COVER LH

    A015CDN

    1. Remove the screw.

    2. Detach the claw and remove the outside reclining adjuster cover LH.

  21. REMOVE OUTSIDE RECLINING ADJUSTER COVER RH


    1. Remove the screw.

    2. Detach the claw and remove the outside reclining adjuster cover RH.

  22. REMOVE INSIDE RECLINING ADJUSTER COVER LH

    A015DBB

    1. Detach the wire harness clamp.

    2. Remove the 2 screws.

    3. Detach the claw and remove the inside reclining adjuster cover LH.

  23. REMOVE INSIDE RECLINING ADJUSTER COVER RH


    1. Detach the wire harness clamp.

    2. Remove the 2 screws.

    3. Detach the claw and remove the inside reclining adjuster cover RH.

  24. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (for Driver Side)


    1. A015DVRE01
      Text in Illustration
      *1 Cable Clamp
      *2 Hook

      Remove the cable clamp and disconnect the active headrest cable from the seatback spring.

    2. Remove the 4 springs.

    3. Detach the 4 hooks and remove the seatback spring.

    4. A015561

      Disconnect the connector.

    5. Remove the 2 screws and lumbar support adjuster assembly LH.

  25. REMOVE BUSH (for Driver Side)


    1. A0159H3

      Detach the 3 claws and remove the bush.

  26. REMOVE LOWER ACTIVE HEADREST UNIT

    A0155TU

    1. Remove the nut and detach clamp, and then disconnect the active headrest cable from the upper active headrest unit.

    2. A01598M

      Remove the 2 nuts and lower active headrest unit.

  27. REMOVE UPPER ACTIVE HEADREST UNIT

    A015B4T

    1. Remove the 4 nuts and upper active headrest unit.

  28. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH

    A0157XK

    1. Remove the screw.

    2. Detach the hook and remove the lower seat cushion shield LH.

  29. REMOVE FRONT LOWER SEAT CUSHION SHIELD RH


    1. Remove the screw.

    2. Detach the hook and remove the lower seat cushion shield RH.

  30. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

    A0159TI

    1. Disconnect the connector and detach the wire harness clamp.

    2. Detach the claw and remove the seat heater control sub-assembly.

  31. REMOVE SEAT CLIMATE CONTROL ECU (w/ Climate Control Seat System)

    A0158C8

    1. Disconnect the connector.

    2. Detach the claw and remove the seat climate control ECU.

  32. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System, for Seat Cushion)

    A0157OU

    1. Detach the 4 claws and disconnect the seat climate control blower LH.

    2. A015A71

      Detach the wire harness clamp.

    3. Remove the 2 screws and seat climate control controller LH.

  33. REMOVE SEAT CLIMATE CONTROL BLOWER LH (w/ Climate Control Seat System)

    A015B4D

    1. Disconnect the connector and remove the 2 bolts.

    2. A015BSJ

      Detach the wire harness clamp.

    3. Remove the nut and seat climate control blower LH.

  34. REMOVE NO. 1 AIR FILTER (w/ Climate Control Seat System)

    A01581E

    1. Rotate the No. 1 air filter counterclockwise to detach the claws and remove it.

  35. REMOVE SEAT FRAME SET BRACKET SUB-ASSEMBLY (w/ Climate Control Seat System)

    A0156R8

    1. Detach the 4 hooks and remove the seat frame set bracket sub-assembly.

  36. REMOVE SEAT POSITION SENSOR (for Driver Side)


    1. A015AZ1

      Using a T30 "TORX" socket wrench, remove the screw and seat position sensor with sensor protector.

    2. Disconnect the connector.

    3. A015AK7E04

      Remove the seat slide position sensor protector from the seat position sensor.

  37. REMOVE FRONT SEAT AIRBAG ASSEMBLY LH


    1. A0155HN

      Detach the 5 clamps and disconnect the wire harness.

    2. A015D6T

      Detach the 2 clamps and disconnect the wire harness.

    3. Remove the 2 nuts and front seat airbag assembly LH.

      CAUTION:

      Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.

  38. REMOVE FRONT SEAT WIRE LH


    1. Disconnect the connectors and detach the wire harness clamps.

    2. Detach the claw and remove the front seat wire LH.