INSTALL SEAT BELT CONTROL ECU
Install the ECU with the nut.
Connect the 2 connectors.
INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
Connect the connector.
Attach the 3 claws to install the lower No. 2 instrument panel finish panel.
Install the 4 bolts.
INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Attach the 6 claws to install the No. 3 instrument cluster finish panel garnish.
INSTALL LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)
Attach the 2 claws and connect the DLC3.
Install the lower instrument panel with the 5 bolts.
INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)
Connect the connector.
Note
When handling the airbag connector, take care not to damage the airbag wire harness.
Attach the 4 claws to install the front passenger side knee airbag.
Install the 4 bolts.
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
Attach the 4 claws to install the No. 2 instrument panel under cover.
INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
Connect the connectors and attach the 2 clamps.
Attach the 8 claws to install the lower instrument panel pad sub-assembly.
Install the clip and screw.
INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION
Attach the 7 claws to install the No. 1 instrument panel finish panel cushion.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
CHECK SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)
Check the SRS warning light Click here.