Click here

PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2057

Click here
Click here Click here
DTC Code DTC Name
B2057 Yaw Rate Sensor
Click here

DESCRIPTION

This DTC is stored when the vehicle is driven at a vehicle speed of 5 km/h (3 mph) or more and a malfunction occurs in the yaw rate sensor.

This circuit consists of the yaw rate sensor and seat belt control ECU.

DTC Code DTC Detection Condition Trouble Area
B2057 The vehicle speed is 5 km/h (3 mph) or more and a malfunction is detected in the yaw rate sensor.

  • Yaw rate sensor

  • Seat belt control ECU

  • Distance control ECU
Click here

WIRING DIAGRAM

Click here

INSPECTION PROCEDURE

Click here

PROCEDURE


  1. Click here

    CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM)


    1. Using the intelligent tester, enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Code.

    2. Clear the DTCs (Click here).

    3. Check for DTCs (Click here).

      OK
      DTC C1234 is not output.

  2. Click here

    CHECK DTC (PRE-CRASH SAFETY SYSTEM)


    1. Using the intelligent tester, enter the following menus: Body / Pre-Crash / Trouble Code.

    2. Clear the DTCs (Click here).

    3. Check for DTCs (Click here).

      Table 1. Result
      Result Proceed to

      OK

      (DTC B2057 is not output)

      		 A

      NG

      (for LHD)

      		 B

      NG

      (for RHD)

      		 C

  3. Click here

    USE SIMULATION METHOD TO CHECKClick here

  4. Click here

    GO TO VEHICLE STABILITY CONTROL SYSTEMClick here

  5. Click here

    REPLACE SEAT BELT CONTROL ECUClick here

  6. Click here

    REPLACE SEAT BELT CONTROL ECUClick here