Click here

CURTAIN SHIELD AIRBAG ASSEMBLY INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.

Click here
  1. Click here

    INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY (w/ Rear No. 2 Seat)


    1. A015A6O

      Install the curtain shield airbag with the 13 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
      Note:

      Do not twist the curtain shield airbag when installing it.

    2. A0155RK

      After installing the bolts, put the curtain shield airbag onto the bracket and close the dual lock fastener.

    3. Connect the connector.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

  2. Click here

    INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY (w/o Rear No. 2 Seat)


    1. A01578Q

      Install the curtain shield airbag with the 10 bolts.

      10 N*m 102 kgf*cm 7 ft.*lbf
      Note:

      Do not twist the curtain shield airbag when installing it.

    2. Connect the connector.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

  3. Click here

    INSTALL ROOF HEADLINING ASSEMBLY (w/ Sliding Roof)


    1. Install the roof headlining (Click here).

  4. Click here

    INSTALL ROOF HEADLINING ASSEMBLY (w/o Sliding Roof)


    1. Install the roof headlining (Click here).

  5. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  6. Click here

    CHECK SRS WARNING LIGHT


    1. Check the SRS warning light (Click here).