REAR FLOOR AIRBAG SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR STEP COVER (w/ Sliding Roof)

    A0159DZ

    Tech Tips

    Use the same procedure to remove the step cover on the other side.


    1. Detach the 2 claws and remove the step cover.

  3. REMOVE REAR STEP COVER (w/o Sliding Roof)

    A0159DZ

    Tech Tips

    Use the same procedure to remove the step cover on the other side.


    1. Detach the 2 claws and remove the step cover.

  4. REMOVE REAR DOOR SCUFF PLATE LH (w/ Sliding Roof)

    A015BJQ

    1. Remove the screw.

    2. Detach the 3 claws and 4 clips, and remove the scuff plate.

  5. REMOVE REAR DOOR SCUFF PLATE LH (w/o Sliding Roof)

    A015BJQ

    1. Remove the screw.

    2. Detach the 3 claws and 4 clips, and remove the scuff plate.

  6. REMOVE REAR DOOR SCUFF PLATE RH (w/ Sliding Roof)

    Tech Tips

    Use the same procedures described for the LH side.

  7. REMOVE REAR DOOR SCUFF PLATE RH (w/o Sliding Roof)

    Tech Tips

    Use the same procedures described for the LH side.

  8. REMOVE REAR FLOOR AIRBAG SENSOR


    1. Fold back the floor carpet.

    2. A015CIS

      Detach the clip and claw, and remove the cover.

    3. A015CVS

      Remove the bolt and sensor.

    4. Disconnect the connector.