KNEE AIRBAG ASSEMBLY (for Driver Side) ON-VEHICLE INSPECTION


  1. CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)


    1. A015BDN

      Perform a diagnostic system check Click here.

    2. With the driver side knee airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the driver side knee airbag with a new one:

      Cuts, minute cracks or marked discoloration on the driver side knee airbag.

  2. CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)


    1. A015AP0

      Perform a diagnostic system check Click here.

    2. With the driver side knee airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the driver side knee airbag with a new one:


      • Cuts, minute cracks or marked discoloration on the driver side knee airbag.

      • Cracks or other damage to the connector.

      • Deformation or cracks on the instrument panel reinforcement.

      Note

      For removal and installation procedures of the driver side knee airbag, be sure to follow the correct procedure.