COMPRESSOR (for 1VD-FTV) DISASSEMBLY


  1. REMOVE COOLER BRACKET

    A0155Q2

    1. Detach the clamp.

    2. Remove the screw and the cooler bracket.

  2. REMOVE MAGNET CLUTCH ASSEMBLY

    A015DHTE01
    SST
    09985-00260

    1. Clamp the cooler compressor in a vise.

    2. Using SST, hold the magnet clutch hub.

    3. Remove the bolt, magnet clutch hub and magnet clutch washer(s).

      Tech Tips

      There is no set number of magnet clutch washers since they are used for adjusting.

    4. A015ACH

      Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

      Note

      Do not damage the seal cover of the bearing when removing the snap ring.

    5. Disconnect the connector.

    6. A0159WN

      Using a snap ring expander, remove the snap ring and magnet clutch stator.