Click here

COMPRESSOR (for 1UR-FE) INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT MAGNET CLUTCH ASSEMBLY


    1. Check the magnet clutch operation.


      1. Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.

        If the operation is not as specified, replace the magnet clutch assembly.

    2. Measure the resistance.

    3. Measure the resistance between terminals 1 and 2.

      Standard resistance
      65 to 125 Ω at 20°C (68°F)
      Table 1. Text in Illustration
      *1 Magnet Clutch Rotor
      *2 Battery
      *3 Magnet Clutch Hub
      *a

      Component without harness connected

      (Magnet Clutch)

      If the resistance is not as specified, replace the cooler compressor assembly.