CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A015DFWE03
      Text in Illustration
      *1 Bracket
      *2 Hook
      *3 Pin
      *4 Grommet

      Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

  2. REMOVE AIR CLEANER HOSE ASSEMBLY


    1. A0155X9

      Disconnect the vacuum hose and No. 2 ventilation hose.

    2. Loosen the 2 hose clamps.

    3. Remove the air cleaner hose.

  3. REMOVE CAMSHAFT POSITION SENSOR

    A0155IX

    1. Disconnect the sensor connector.

    2. Remove the bolt and sensor.

  4. REMOVE VVT SENSOR


    1. A015CTLE05
      Text in Illustration
      *A for Bank 2
      *B for Bank 1

      Disconnect the 4 sensor connectors.

    2. Remove the 4 bolts and 4 sensors.