Click here

ACCELERATOR PEDAL INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL ACCELERATOR PEDAL ASSEMBLY

    Note:

    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal assembly.

      If applied, the accelerator pedal assembly must be replaced.

    • Avoid physical shocks to the accelerator pedal assembly.

    • Do not disassemble the accelerator pedal assembly.


    1. Install the accelerator pedal assembly with the 2 nuts.

      5.4 N*m 55 kgf*cm 48 in.*lbf

    2. Connect the accelerator pedal position sensor connector.

  2. Click here

    INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect the connectors.

    2. Attach the 3 claws to install the No. 1 instrument panel under cover.

    3. Install the 2 screws.