CAMSHAFT OIL CONTROL VALVE INSTALLATION


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1)


    1. Install a new O-ring to the oil control valve.

    2. Apply a light coat of engine oil to the O-ring.

    3. Install the oil control valve with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

    4. Connect the oil control valve connector.

  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1)


    1. Install a new O-ring to the oil control valve.

    2. Apply a light coat of engine oil to the O-ring.

    3. Install the oil control valve with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

    4. Connect the oil control valve connector.

  3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2)


    1. Install a new O-ring to the oil control valve.

    2. Apply a light coat of engine oil to the O-ring.

    3. Install the oil control valve with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

    4. Connect the oil control valve connector.

  4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2)


    1. Install a new O-ring to the oil control valve.

    2. Apply a light coat of engine oil to the O-ring.

    3. Install the oil control valve with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

    4. Connect the oil control valve connector.

  5. INSTALL AIR CLEANER HOSE ASSEMBLY


    1. A015CFTE01
      Text in Illustration
      *1 Groove
      *2 Protrusion

      Install the air cleaner hose so that the protrusion of the air cleaner cap aligns with the groove of the hose as shown in the illustration.

    2. Tighten the 2 clamps.

      Torque:
      2.5 N*m  { 25 kgf*cm, 22 in.*lbf }

    3. Connect the vacuum hose.

    4. Connect the No. 2 ventilation hose.

  6. INSTALL V-BANK COVER SUB-ASSEMBLY


    1. A0157E7E02
      Text in Illustration
      *1 Bracket
      *2 Hook
      *3 Pin
      *4 Grommet

      Attach the 2 V-bank cover hooks to the bracket. Then align the 3 V-bank cover grommets with the 3 pins, and press down on the V-bank cover to attach the pins.