Click here

POWER STEERING OIL PRESSURE SWITCH REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE FRONT WHEEL

  2. Click here

    REMOVE FRONT FENDER APRON TRIM PACKING A


    1. A015AN4

      Remove the 3 clips and front fender apron trim packing A.

  3. Click here

    REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (w/ Active Height Control)


    1. A0155D8

      Disconnect the connector.

    2. Remove the nut, bolt and front height control sensor sub-assembly RH.

  4. Click here

    DRAIN POWER STEERING FLUID

  5. Click here

    REMOVE POWER STEERING OIL PRESSURE SWITCH


    1. A0155UM

      Disconnect the power steering oil pressure switch connector.

    2. Using a 24 mm deep socket wrench, remove the power steering oil pressure switch.

    3. Remove the O-ring from the power steering oil pressure switch.