MANIFOLD ABSOLUTE PRESSURE SENSOR REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A0158H7E01
      Text in Illustration
      *1 Grommet
      *2 Pin
      *3 Hook
      *4 Bracket

      Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

  2. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A015617

      Disconnect the manifold absolute pressure sensor connector.

    2. Remove the bolt and manifold absolute pressure sensor.