IGNITION COIL AND SPARK PLUG REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A0158H7E01
      Text in Illustration
      *1 Grommet
      *2 Pin
      *3 Hook
      *4 Bracket

      Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

  2. REMOVE AIR CLEANER AND HOSE


    1. A0159Z0

      Disconnect the No. 2 PCV hose and No. 1 air hose.

    2. Disconnect the mass air flow meter connector and detach the clamp.

    3. Remove the 3 bolts and loosen the hose clamp, and then remove the air cleaner and hose.

  3. REMOVE IGNITION COIL ASSEMBLY


    1. for Bank 1:


      1. A015AVX

        Detach the 4 clamps and disconnect the engine wire.

      2. Disconnect the 4 ignition coil connectors.

      3. A015AAZ

        Remove the 4 bolts and 4 ignition coils.

    2. for Bank 2:


      1. A0155MH

        Remove the 2 bolts and disconnect the water by-pass pipe.

      2. A015BVE

        Detach the 3 clamps and disconnect the engine wire.

      3. Disconnect the 4 ignition coil connectors.

      4. A015A25

        Remove the 4 bolts and 4 ignition coils.

  4. REMOVE SPARK PLUG


    1. Using a 16 mm plug wrench, remove the 8 spark plugs.