Click here

CAMSHAFT OIL CONTROL VALVE REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A0158H7E01

      Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

      Table 1. Text in Illustration
      *1 Grommet
      *2 Pin
      *3 Hook
      *4 Bracket
  2. Click here

    REMOVE AIR CLEANER CAP AND HOSE


    1. A0156RY

      Disconnect the No. 2 PCV hose and No. 1 air hose.

    2. Disconnect the mass air flow meter connector and detach the clamp.

    3. Detach the 4 clamps.

    4. Loosen the hose clamp and remove the air cleaner cap and hose.

  3. Click here

    REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 1)


    1. A0156T9

      Disconnect the camshaft timing oil control valve connector.

    2. Remove the bolt and camshaft timing oil control valve.

    3. Remove the O-ring from the camshaft timing oil control valve.

  4. Click here

    REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 1)


    1. A015CQ0

      Disconnect the camshaft timing oil control valve connector.

    2. Remove the bolt and camshaft timing oil control valve.

    3. Remove the O-ring from the camshaft timing oil control valve.

  5. Click here

    REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side of Bank 2)


    1. w/ Secondary Air Injection System:


      1. A015B2U

        Disconnect the throttle body connector and detach the clamp.

      2. A0155X4

        Remove the hose clamp, bolt and air pipe.

    2. A015BX8

      Disconnect the camshaft timing oil control valve connector.

    3. Remove the bolt and camshaft timing oil control valve.

    4. Remove the O-ring from the camshaft timing oil control valve.

  6. Click here

    REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side of Bank 2)


    1. A015DJG

      Disconnect the camshaft timing oil control valve connector.

    2. Remove the bolt and camshaft timing oil control valve.

    3. Remove the O-ring from the camshaft timing oil control valve.