CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE V-BANK COVER


    1. A0159TNE01
      Text in Illustration
      *1 Pin
      *2 Hook

      Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

  2. REMOVE NO. 1 AIR CLEANER HOSE


    1. A01569C

      Disconnect the No. 2 PCV hose and vacuum hose.

    2. Remove the bolt and loosen the 2 hose clamps.

    3. Remove the No. 1 air cleaner hose.

  3. REMOVE VVT SENSOR (for Intake Side of Bank 1)


    1. A0159ST

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

  4. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)


    1. A015AKO

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

  5. REMOVE VVT SENSOR (for Intake Side of Bank 2)


    1. A0155Y6

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.

  6. REMOVE VVT SENSOR (for Exhaust Side of Bank 2)


    1. A015606

      Disconnect the VVT sensor connector.

    2. Remove the bolt and VVT sensor.