Click here

AIR PUMP REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. A0159SG

      Remove the 3 bolts and 2 screws.

    2. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.

  2. Click here

    REMOVE FRONT FENDER APRON TRIM PACKING A


    1. A015AN4

      Remove the 3 clips and front fender apron trim packing A.

  3. Click here

    DISCONNECT FRONT FENDER LINER RH


    1. A0155NF

      Remove the screw, and disconnect the liner from the front bumper cover.

    2. Using a T30 "TORX" socket, remove the 2 screws.

    3. Remove the 4 clips.

    4. Partially remove the fender liner.

      Tip:

      It is not necessary to fully remove the fender liner. Partially remove it so that the air pump can be removed.

  4. Click here

    REMOVE NO. 3 AIR INJECTION SYSTEM HOSE


    1. A015AOW

      Inside engine room:


      1. Slide the clip and disconnect the No. 3 air injection system hose from the air tube.

      2. Detach the clamp and disconnect the No. 3 air injection system hose from the clamp.

    2. A015A5I

      Inside front fender RH:


      1. Detach the clamp from the air pump bracket.

      2. Slide the clip and remove the No. 3 air injection system hose.

  5. Click here

    REMOVE AIR PUMP ASSEMBLY


    1. A01564Y

      Disconnect the connector.

    2. Detach the connector clamp from the bracket.

    3. Disconnect the wire harness from the clamp.

    4. A015D4U

      Remove the 2 bolts, 2 nuts and air pump assembly.

  6. Click here

    REMOVE AIR PUMP INLET


    1. A015AK3

      Remove the 2 bolts and air pump inlet.

  7. Click here

    REMOVE NO. 1 AIR INJECTION SYSTEM HOSE


    1. A0158X1

      Remove the No. 1 air injection system hose from the air pump assembly.

  8. Click here

    REMOVE AIR PUMP


    1. A015C9D

      Detach the 2 clamps from the air pump bracket.

    2. Remove the 3 insulators from the air pump.