Click here

FUEL PRESSURE REGULATOR REMOVAL

Click here
Click here Click here
  1. Click here

    DISCHARGE FUEL SYSTEM PRESSURE

    (Click here)

  2. Click here

    PRECAUTION

    Note:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  3. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A015DFWE03

      Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

      Table 1. Text in Illustration
      *1 Bracket
      *2 Hook
      *3 Pin
      *4 Grommet
  5. Click here

    REMOVE AIR CLEANER HOSE ASSEMBLY


    1. A0155X9

      Disconnect the vacuum hose and No. 2 ventilation hose.

    2. Loosen the 2 hose clamps.

    3. Remove the air cleaner hose.

  6. Click here

    REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. A015B4H

      Disconnect the No. 2 fuel tube from the pressure regulator (Click here).

      CAUTION:

      Put a cloth or equivalent under the pressure regulator.

    2. A015CIU

      Disconnect the vacuum sensing hose from the pressure regulator.

    3. A0159Z7

      Remove the 2 bolts, and pull out the pressure regulator.

    4. Remove the O-ring from the pressure regulator.