FUEL PUMP INSTALLATION


  1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    1. Apply a light coat of gasoline or grease to a new gasket, and install it to the fuel tank.

    2. A0158D8E02
      Text in Illustration
      *1 Protrusion
      *2 Groove
      A015DIT Front

      Install the fuel suction with pump and gauge tube assembly into the fuel tank.

      Note

      Be careful not to bend the arm of the fuel sender gauge.

      Tech Tips

      Align the protrusion of the fuel suction with pump and gauge tube assembly with the groove of the fuel tank.

    3. Put the fuel pump gauge retainer on the fuel tank. While holding the fuel suction with pump and gauge tube assembly, tighten the fuel pump gauge retainer 1 complete turn by hand.

    4. A015B6RE01

      Set SST on the fuel pump gauge retainer.

      SST
      09808-14030

      Tech Tips


      • Hold the fuel suction with pump and gauge tube assembly upright by hand to make sure that the fuel suction tube gasket is not moved out of position.

      • Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.

      • Install SST while pressing the claws of SST against the fuel pump gauge retainer (toward the center of SST).

    5. A015BV9E03
      Text in Illustration
      *1 Fuel Tank Side Mark
      *2 Fuel Pump Gauge Retainer Side Mark

      Using SST, tighten the fuel pump gauge retainer until the mark on the fuel pump gauge retainer is within range A on the fuel tank as shown in the illustration.

      SST
      09808-14030

      Tech Tips

      Fit the tips of SST onto the ribs of the fuel pump gauge retainer.

  2. INSTALL FUEL TANK SUB-ASSEMBLY

    Click here