FUEL PUMP (for Double Tank Type) REASSEMBLY

Note

Do not disconnect the hoses indicated in the illustration.

A0158I6

  1. INSTALL NO. 1 FUEL SUCTION SUPPORT


    1. A0155Y1

      Attach the 2 claws to the claw holes to install the fuel suction support.

  2. INSTALL FUEL MAIN VALVE ASSEMBLY


    1. A0156I8E10

      Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve.

    2. A01593CE01

      Install the fuel main valve to the fuel filter case.

      Note

      Make sure the O-rings are not cut or pinched during the installation.

  3. INSTALL FUEL PUMP


    1. A015CWE

      Connect the fuel pump wire harness connector to the fuel pump.

    2. A015DXME01

      Apply a light coat of gasoline to a new O-ring. Then install the spacer and O-ring to the fuel pump.

    3. A015C78E01

      Attach the 5 claws to the claw holes and install the fuel pump to the fuel filter case.

  4. INSTALL NO. 1 FUEL SUB-TANK

    A0159LPE01

    Note

    Make sure that the fuel tube passes into the section marked by the circle.


    1. A015900

      Attach the 3 claws to the claw holes and install the fuel sub-tank.

    2. A0158V4

      Attach the 3 claws to the claw holes.

    3. A015ALIE01

      Connect the jet pump (labeled B) to the sub-tank.


      1. Attach the claw on the end of the tube to the claw hole.

    4. Connect the jet pump (labeled A) to the sub-tank.

    5. A0155PY

      Connect the fuel pump connector.

  5. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A015BJO

      Set the sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it.

      Text in Illustration
      A015DIT Slide

    2. Connect the fuel sender gauge connector.