Click here

FUEL PUMP (for Double Tank Type) DISASSEMBLY

Click here
Click here Click here
A0158I6
Note:

Do not disconnect the hoses indicated in the illustration.

Click here
  1. Click here

    REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01582N

      Disconnect the fuel sender gauge connector.

    2. A0158XWE03

      Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.

      Table 1. Text in Illustration
      A015DIT Press Down
      A015CC1 Slide
  2. Click here

    REMOVE NO. 1 FUEL SUB-TANK


    1. A0155NT

      Disconnect the fuel pump connector.

    2. A015877E01

      Disconnect the jet pump (labeled A) from the sub-tank.

    3. Disconnect the jet pump (labeled B) from the sub-tank.


      1. Using a small screwdriver, detach the claw from the sub-tank.

        Tip:

        Tape the screwdriver tip before use.

    4. A0158V4

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note:

      Do not damage the fuel sub-tank.

      Tip:

      Tape the screwdriver tip before use.

    5. A015900

      Using a screwdriver, detach the 3 claws from the claw holes.

      Note:

      Do not damage the fuel sub-tank.

      Tip:

      Tape the screwdriver tip before use.

  3. Click here

    REMOVE FUEL PUMP


    1. A015C78E01

      Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.

      Tip:

      Tape the screwdriver tip before use.

    2. A015CWE

      Disconnect the fuel pump wire harness connector from the fuel pump to remove it.

    3. A01588GE01

      Remove the O-ring and spacer from the fuel pump.

  4. Click here

    REMOVE FUEL MAIN VALVE ASSEMBLY


    1. A015CNOE01

      Remove the fuel main valve from the fuel filter case.

    2. Remove the 2 O-rings from the fuel main valve.

  5. Click here

    REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. A0155Y1

      Detach the 2 claws from the claw holes to remove the fuel suction support.