FUEL PRESSURE REGULATOR REMOVAL


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE INTAKE AIR SURGE TANK

    Click here

  5. DISCONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY


    1. A015CSO

      Disconnect the No. 2 fuel pipe sub-assembly Click here.

  6. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. Disconnect the vacuum hose.

    2. A015CEN

      Remove the 2 bolts and fuel pressure regulator.

    3. Remove the O-ring from the fuel pressure regulator.