REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A015ARHE01

      Using SST, hold the crankshaft.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A015CMP

      Remove the 10 bolts, the rear drive plate spacer, the drive plate and ring gear, and the crankshaft angle sensor rotor.

  3. REMOVE REAR CRANKSHAFT OIL SEAL


    1. A015CUFE01
      Text in Illustration
      *1 Protective Tape
      *2 Cut Position

      Using a knife, cut off the lip of the rear crankshaft oil seal.

    2. Using a screwdriver, pry out the rear crankshaft oil seal.

      Note

      Do not damage the surface of the rear crankshaft oil seal press fit hole or crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.