FRONT CRANKSHAFT OIL SEAL INSTALLATION


  1. INSTALL FRONT CRANKSHAFT OIL SEAL


    1. Apply MP grease to the lip of a new front crankshaft oil seal.

      Note


      • Do not allow foreign matter to contact the lip of the oil seal.

      • Do not allow MP grease to contact the dust seal.

    2. A0155WBE01

      Using SST and a hammer, tap in the front crankshaft oil seal to a depth between 0 and 1.0 mm (0 to 0.0394 in.) from the timing chain cover edge.

      SST
      09223-22010
      09506-35010

      Note


      • Keep the lip free from foreign matter.

      • Do not tap the front crankshaft oil seal at an angle.

  2. INSTALL CRANKSHAFT TIMING GEAR KEY


    1. Install the crankshaft timing gear key to the crankshaft.

  3. INSTALL CRANKSHAFT PULLEY


    1. Align the key groove of the pulley with the pulley set key, and slide on the pulley to install it.

    2. A015B87E05
      Text in Illustration
      *a Hold
      A015DIT Turn

      Using SST, install the pulley set bolt.

      SST
      09213-70011
      09330-00021
      Torque:
      300 N*m  { 3059 kgf*cm, 221 ft.*lbf }

  4. INSTALL RADIATOR ASSEMBLY

    Click here