POWER STEERING OIL PRESSURE SWITCH REMOVAL


  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    1. A015DL0

      Remove the 3 bolts and screw.

    2. Loosen the clip and remove the front fender splash shield LH.

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    1. Remove the 3 bolts and 2 screws.

    2. Loosen the clip and remove the front fender splash shield RH.

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. A0157XJ

      Remove the 10 bolts and No. 1 engine under cover.

  4. DRAIN ENGINE COOLANT

    CAUTION:

    Do not remove the radiator reservoir cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

    Tech Tips

    Collect the coolant in a container and dispose of it according to the regulations in your area.


    1. Loosen the radiator drain cock plug.

    2. Remove the radiator reservoir cap to drain the coolant in the radiator.

    3. Loosen the oil filter bracket drain cock plug to drain the coolant in the engine.

      A015DKUE01

    4. Tighten the radiator drain cock plug by hand.

    5. A0158UW

      Tighten the oil filter bracket drain cock plug.

      Torque:
      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

  5. REMOVE V-RIBBED BELT (w/ Viscous Heater)


    1. A0155TJ

      Loosen the lock nut and turn the bolt counterclockwise.

    2. Remove the V-ribbed belt.

  6. REMOVE NO. 1 IDLER PULLEY (w/ Viscous Heater)


    1. A015A7A

      Remove the bolt, cover, No. 1 idler pulley and collar.

  7. REMOVE NO. 3 IDLER PULLEY (w/ Viscous Heater)


    1. A015C7J

      Remove the nut and No. 3 idler pulley.

  8. REMOVE V-RIBBED BELT


    1. A015CL0

      Using a wrench to the V-ribbed belt tensioner bracket, turn the wrench clockwise and remove the V-ribbed belt.

  9. REMOVE INTERCOOLER ASSEMBLY (w/ Intercooler)

    Click here

  10. REMOVE NO. 1 COOL AIR INLET (w/o Intercooler)


    1. A015E40

      Loosen the No. 1 air hose clamp.

    2. Disconnect the turbo pressure sensor connector, intake air temperature sensor connector and vacuum hose.

    3. A0158C6

      Remove the 3 nuts, bolt and No. 1 cool air inlet.

    4. Remove the gasket from the air tube RH.

  11. REMOVE NO. 2 COOL AIR INLET (w/o Intercooler)


    1. A015B0X

      Loosen the No. 2 air hose clamp.

    2. A015A93

      Remove the 3 nuts, bolt and No. 2 cool air inlet.

    3. Remove the gasket from the air tube LH.

  12. DISCONNECT WATER HOSE SUB-ASSEMBLY (w/ Viscous Heater)


    1. A01579DE01

      Disconnect the 2 water hoses.

  13. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A0159QI

      Loosen the hose clamp.

    2. Disconnect the mass air flow meter connector and using a clip remover, detach the wire harness clamp from the air cleaner cap.

    3. Detach the 4 clamps and remove the air cleaner cap.

  14. REMOVE NO. 1 AIR CLEANER HOSE


    1. A015DGT

      Loosen the hose clamp and remove the No. 1 air cleaner hose.

  15. REMOVE INTAKE AIR CONNECTOR


    1. A015852E04
      Text in Illustration
      *A w/ Viscous Heater

      w/ Viscous Heater:

      Disconnect the 2 connectors from the viscous with magnet clutch heater and water temperature sensor.

    2. w/o Viscous Heater:

      Disconnect the connector from the water temperature sensor.

    3. Using a clip remover, detach the 3 wire harness clamps.

    4. A015DJJ

      Loosen the 2 hose clamps and remove the 2 bolts and intake air connector.

  16. REMOVE NO. 1 AIR HOSE


    1. A0158SB

      Loosen the hose clamp and remove the No. 1 air hose.

  17. REMOVE NO. 3 AIR TUBE


    1. A0159U8

      Disconnect the wire harness from the clamp.

    2. Remove the nut and ground wire.

    3. A0155HD

      Remove the bolt and disconnect the wire harness bracket.

    4. A01572L

      Loosen the hose clamp and remove the bolt and No. 3 air tube.

  18. REMOVE HEATER WATER PIPE SUB-ASSEMBLY (w/ Viscous Heater)


    1. A0158HY

      Remove the 4 bolts and disconnect the 4 water hose ends, and then remove the heater water pipe.

  19. REMOVE NO. 1 AIR CLEANER PIPE SUB-ASSEMBLY


    1. A015D8F

      Loosen the hose clamp.

    2. Remove the bolt and No. 1 air cleaner pipe.

  20. DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY


    1. A0155N2

      Insert a screwdriver between the reservoir and oil reservoir bracket, push the claw, and then disconnect the reservoir by pulling it upwards.

  21. REMOVE NO. 1 OIL RESERVOIR BRACKET


    1. A0159Q4

      Remove the 2 bolts and bracket.

  22. REMOVE RADIATOR RESERVOIR ASSEMBLY


    1. A015BUM

      Disconnect the 2 hoses.

    2. Remove the 3 bolts and radiator reservoir.

  23. REMOVE POWER STEERING OIL PRESSURE SWITCH


    1. A01590QE01
      Text in Illustration
      *A w/ DPF
      *B w/o DPF

      Disconnect the oil pressure switch connector.

    2. Using a 19 mm deep socket wrench, remove the oil pressure switch.