Click here

DRIVE BELT ON-VEHICLE INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT FAN AND GENERATOR V BELT


    1. A015DA2E13

      Check the belt for wear, cracks or other signs of damage.

      If any of the following defects is found, replace the fan and generator V belt.


      • The belt is cracked.

      • The belt is worn out to the extent that the cords are exposed.

      • The belt has chunks missing from the ribs.

    2. A0156XEE11

      Check that the belt fits properly in the ribbed grooves.

      Table 1. Text in Illustration
      *a CORRECT
      *b INCORRECT
      Tip:

      Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.

  2. Click here

    INSPECT V-RIBBED BELT TENSIONER ASSEMBLY


    1. Check that nothing gets caught in the tensioner by turning it clockwise and counterclockwise.

      If the result is not as specified, replace the V-ribbed belt tensioner assembly.