ACTIVE CONTROL ENGINE MOUNT INSTALLATION

Note


  • When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.

  • w/DPF

    When fuel lines are disconnected, air may enter the fuel lines, leading to engine starting trouble. Therefore, perform forced regeneration and bleed the air from the fuel lines Click here.


  1. INSTALL FRONT ENGINE MOUNTING INSULATOR RH


    1. A015A72

      Install the mounting insulator with the nut.

      Torque:
      80 N*m  { 816 kgf*cm, 59 ft.*lbf }

    2. Connect the vacuum hose.

  2. INSTALL FRONT ENGINE MOUNTING INSULATOR LH


    1. A0156OA

      Install the mounting insulator with the nut.

      Torque:
      80 N*m  { 816 kgf*cm, 59 ft.*lbf }

  3. INSTALL ENGINE ASSEMBLY


    1. Install the engine assembly Click here.