ACTIVE CONTROL ENGINE MOUNT INSPECTION


  1. INSPECT FRONT ENGINE MOUNTING INSULATOR


    1. A015DG1

      Visually check the front engine mounting insulator for leaks.

      If the fluid leaks, replace the front engine mounting insulator.

  2. INSPECT FRONT ENGINE MOUNTING INSULATOR


    1. A0157YXE01

      Connect a vacuum pump to the engine mount insulator.

    2. Using the vacuum pump, apply a vacuum of 80 kPa (600 mmHg. 25 in.Hg) and wait for 1 minute.

    3. Check that there is no change in the needle movement of the vacuum pump gauge.

      If the result is not as specified, replace the front engine mounting insulator.