CRANKSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CRANKSHAFT POSITION SENSOR

    A0155XF

    1. Apply a light coat of engine oil to the O-ring.

      Note

      When reusing the sensor, inspect the O-ring.

      If the O-ring has scratches or cuts, replace the sensor.

    2. A015B82

      Install the sensor with the bolt.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    3. Connect the sensor wire harness clamp.

  2. INSTALL COOLER COMPRESSOR ASSEMBLY


    1. Install the cooler compressor Click here.