Click here

CAMSHAFT POSITION SENSOR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL CAMSHAFT POSITION SENSOR


    1. Apply a light coat of engine oil to the O-ring.

      Note:

      When reusing the sensor, inspect the O-ring.

      If the O-ring has scratches or cuts, replace the sensor.

    2. A015CJR

      Install the sensor with the bolt.

      5.0 N*m 51 kgf*cm 44 in.*lbf

    3. Connect the sensor connector.

  2. Click here

    INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)


    1. A015BEI

      Install the engine cover with the 2 nuts.

      8.0 N*m 82 kgf*cm 71 in.*lbf