Click here

FUEL PUMP REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE FUEL TANK SUB-ASSEMBLY

    (Click here)

  2. Click here

    REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    1. A015837E01

      Set SST on the retainer.

      09808-14030
      Tip:

      • Securely attach the claws of SST to the protrusion of the retainer and fix SST in place.

      • Install SST while pressing the claws of SST against the retainer (towards the center of SST).

    2. A01573CE01

      Using SST, loosen the retainer.

      09808-14030
      Table 1. Text in Illustration
      A015DIT Turn
      Note:

      • Do not use any tools other than those specified in this operation. Damage to the retainer or the fuel tank may result.

      • While pressing down on SST so that the claws of SST do not slip off the protrusion of the retainer, turn the retainer counterclockwise to loosen it.

      Tip:

      The protrusion of the retainer fit in the ends of SST.

    3. Remove the retainer.

    4. Remove the retainer while holding the fuel suction tube assembly by hand.

      Note:

      Be careful not to bend the arm of the fuel sender gauge.

    5. Remove the gasket from the fuel tank.